Welcome to Our Wedding Entry Sign, Custom Vinyl Decal Sticker for mirrors

This listing is for one customizable decal. Mirror not included.

Application Steps: (Professional Installation Recommended)

1. Clean the application surface with soap and water or rubbing alcohol (70% isopropyl alcohol). Area must be dry before application. Do not use chemicals or cleaners with water repellent properties.

2. Squeegee the decal on a flat surface to assure it is stuck to the transfer tape and ready for install.

3. Hold up the decal to the desired location. Then put a piece of masking tape down the middle of the decal. The tape should start above the decal and go all the way down through the center and below the decal.

4. The masking tape will be used as a hinge for installation. Carefully peel back transfer tape with the decal on it from one side of the decal left or right. Hold the transfer tape back while you tear or cut away the backing paper.

5. Carefully lay the transfer tape back down to your application surface starting from the center and applying out-words using light pressure with your squeegee from middle to outside.

6. Remove the the masking tape. Repeat step 4 and 5 for the other side of your decal completely removing the backing paper with this final side. Then firmly squeegee your entire decal from the middle to the edge.

7. Now that your decal is installed with the transfer tape still on top. Slowly peel back the transfer tape from a corner of your decal holding the transfer tape as flat and low as possible for easiest application.

8. Enjoy your perfectly applied background-less decal for a clean professional appearance.


NOTICE: Premium Graphic Co. is not responsible for decals ruined during installation. (Please message us if your order arrives damaged before attempting install) Professional installation recommended. Thank you!

SKU:ST23061331